Maxi-Cosi Quinny FREESTYLE XL COMFORT Modo De Empleo/Garantia página 10

GB
- Check to make sure the adapters are secure.
- To remove the adapters, move the red button under the adapter attachments outwards (17,1) while at the
same time sliding the adapters upwards (17,2).
- Place both guards back in the adapter attachments.
Placing / removing the Quinny carrycot and Maxi-Cosi car safety seat
- Apply the brake on the Freestyle 3 XL Comfort (see Using the parking brake).
- Place the carrycot/car safety seat onto the adapters (18/20) with the foot end between the sides of the handle.
- Check to make sure the carrycot/car seat is secured by lifting it up by the handles.
- To remove, place your thumbs on the control buttons on both sides of the carrycot/car seat (19,1/21,1).
- Push in the buttons while lifting the carrycot/car safety seat from the Freestyle 3 XL Comfort (19,2/21,2).
When used as a pushchair (see illustrations 22 - 37)
Placing / removing the pushchair seat
- Apply the brake on the Freestyle 3 XL Comfort (see Using the parking brake).
- IMPORTANT: Make sure you remove the adapters and position the guards before attaching the pushchair seat
(see Placing/Removing the Adapters).
- The pushchair seat can be placed in either a front-facing or backward-facing position (22).
- Position the pushchair seat so that the hooks under the seat bottom are on the cross-bars of the frame (22).
- Push the seat onto the cross-bars (23) until it clicks into place.
- Check to make sure the seat is securely attached by lifting up on it.
- To remove the pushchair seat, pull out the handle behind the seat (24,1) and lift out the seat (24,2).
Safety harness
- Apply the brake on the Freestyle 3 XL Comfort (see Using the parking brake).
- Make sure the safety harness is loosened before placing your child (carefully!) into the seat.
- Slide the buckle sections together (25,1) and fasten the lap and shoulder belts into the crotch strap by
clicking the buckle sections into the fastener (25,2).
- Adjust the belts to the size of your child by lengthening or shortening the belts using the clasps (26).
- Push the buttons (27,1) to open the fastener (27,2).
- There are D-rings for securing an additional safety harness. Make sure the safety harness complies with all
safety standards (i.e. BS 6684) before using it.
- The shoulder belts are height adjustable. To change the height, open the cover on the back and adjust the
clasp both on the front in the cover and in the board. Tilt the clasp when adjusting (28).
- IMPORTANT: The press studs on the side of the seat are for attaching a footmuff only (29).
Opening / closing the safety bar
- To secure the safety bar, click the end back into the opening (30).
- To open the safety bar, push in the button (31,1) and pull the safety bar outwards (31,2).
- IMPORTANT: Always secure your child with the safety harness.
Footrest
- The footrest can be adjusted to 2 positions.
- Press both buttons under the footrest at the same time (32,1), and then adjust the footrest into the desired
position (32,2).
- IMPORTANT: Never let your child sit or stand on the footrest.
10