Tabla de contenido
Removing the cassette hanger / cassette
holder (See Fig.3)
Prior to performing the following procedure, remove
the FF / REW lever assembly.
1.
From the rear of the unit, bend the two tabs f
outwards and disengage the two joints g in the
direction of the arrow.
2.
Push the eject lever and remove the cassette holder
from the playback head. Disengage the two joints h
of the cassette hanger / cassette holder and the eject
lever in the direction of the arrow.
3.
Lift the cassette hanger / cassette holder and disengage
the joint i of the return link and the eject lever.
Removing the reel disc assembly
Prior to performing the following procedure, remove
the FF / REW lever assembly and the cassette
hanger / cassette holder.
1.
Remove the C washer and pull out reel disc assembly.
Replace with a new C washer when
ATTENTION:
reattaching.
Removing the motor assembly
1.
Unsolder the two wires j on the motor assembly.
ATTENTION:
To replace the sub-belt, remove the
main belt and the sub-belt from the
motor pulley. Then remove the three
screws E and one screw F. Replace
with a new sub-belt while lifting the reel
base assembly slightly.
2.
Turn over the cassette mechanism assembly and
remove the main belt and the sub-belt from the
motor pulley.
ATTENTION:
The main belt can now be removed.
3.
Remove the two screws G
assembly.
All manuals and user guides at all-guides.com
Joint g
(See Fig.4)
(See Fig.5)
attaching the motor
Cassette holder
Cassette hanger
Chassis
Tab f
Tab f
Joint g
Fig.3
C washer
C washer
Fig.4
Main-belt
Flywheel (BF)
E
E
Reel base assembly
Flywheel (BR)
Fig.5
KS-FX202
Return link
Joint i
Eject lever
Joint h
Joint h
Reel disc assembly
Motor assembly
Sub-belt
G
Motor pulley
G
Soldering j
E
F
1-9
Tabla de contenido
