Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Install the mud protection box
1. Apply with a certain amount of release agent at the surrounding area of cement protection box and the wall.
2. Use screw to combine cement protection box and valve box, fill in slurry at the surrounding slot of valve box and
paste with tiles.
Attention
• While cleaning the tiles, please do not use acid or alkaline detergent for cleaning in order to preventing product from
being damaged.
• While filling with the slurry, you must fill in it properly ; otherwise, the panel cannot be installed to its position.
Valve box
After the slurry is solid remove the mud protection box.
Attention
The fixing screw will be used to fix the panel, please do not throw it away.
7. External pipe installation
Have connecting pipe to be wrapped with water-stop rubber tape connected with outlet connecting with urinal for water
test.
Attention
• 90° Curve pipe could be cut or adjusted based on physical installation demand.
• Nut must be firmly fixed with curve pipe, it should not be loosen for preventing leakage.
x4
(components not provided with this product)
A525560500
*Connection between outlet and urinal not
supplied with the product(A525560500).
Mud protection box
Fixing screw (+)
Outlet connector
*Connecting pipe
*Rubber packing
*Nut
*Cover
*90°Curve pipe
4
Build-in depth
7-30mm
Tabla de contenido
