Operation Description - Stenner Econ T Serie Manual De Instalación Y Mantenimiento

OPERATION DESCRIPTION

CONTROL PANEL
The pump features a control panel with an LCD display; when operating it will display the
current day, time, and the pump mode of operation; either AUTO, ON or OFF.
The display has indicators that represent the days of the week, operating mode and the
event (timer). There are 24 separate ON and OFF events that can be programmed within a
7 day period. The timer can be set in increments by hour and minute.
DAY
CLOCK
Following are the buttons for programming the pump.
Adjust day
DAY
Adjust hour
HOUR
Adjust minute
MINUTE
24-hr format., use with the
CLOCK
day and time
Cycles pump between AUTO, ON & OFF
MANUAL
Use with
TIMER DAY
Programming Notes
When a timer has been initiated, the display will show the timer number (TIMER 01,
TIMER 02, TIMER 03, etc.) and ON (blinking) to show that the pump is running a timer in
AUTO mode.
Each separate ON and OFF event can run from a minimum of 1 minute to a maximum of
23 hours and 59 minutes within each programmed day.
10
Econ T
All manuals and user guides at all-guides.com
HOUR MINUTE
MANUAL TIMER
Control Panel
,
DAY HOUR
, , buttons to program the on and off events
HOUR MINUTE
www.stenner.com
Days of the Week
Timers (Events)
Operating Mode
24-hr Clock
HH:MM:SS
Programming Buttons
& button to set the current
MINUTE