Poulan Pro PP28CD Manual De Instrucciones página 6

Locking/Release
Button in Primary Hole
For assembly of optional attachments, refer
to the ASSEMBLY section of the applicable
attachment instruction manual.
ATTACHING SHIELD
CAUTION:
The shield must be properly
installed. The shield provides partial protection
from the risk of thrown objects to the operator
and others and is equipped with a line limiter
blade which cuts excess line to the proper
length. The line limiter blade (on underside of
shield) is sharp and can cut you. For proper
orientation of shield, see KNOW YOUR TRIM-
MER illustration in OPERATION section.
1. Insert bracket into slot.
2. Pivot shield until shield and bracket holes
are aligned.
3. Insert bolt through shield and bracket.
4. Securely tighten wing nut onto bolt.
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT.
Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Shaft
Trimmer
head
ON/STOP SWITCH
The ON/STOP switch is used to stop engine. To
stop the engine, push and release the engine
ON/STOP switch.
All manuals and user guides at all-guides.com
ATTACHING THE ASSIST HANDLE
CAUTION:
dle, be sure it remains between the arrows on
the shaft.
1. Position the handle between the 2 arrows
2. Rotate the handle on the shaft to an up-
3. Fit the screw and wing nut.
4. Tighten wing nut.
OPERATION
ON/STOP
switch
Assist handle
Coupler
Primer bulb
Start lever
Shield
PRIMER BULB
The PRIMER BULB removes air from the car-
buretor and fuel lines and fills them with fuel.
This allows you to start the engine with fewer
6
Slot
Bracket
Wing
Bolt
nut
When attaching the assist han-
on the shaft.
right position.
Handle
Wing nut
Shaft
Throttle trigger
Spark plug
Starter handle
Muffler
Shield
Bolt