Poulan Pro PP28CD Manual De Instrucciones página 13

Idle speed screw
CAUTION:
Perform the following steps af-
ter each use:
S Allow engine to cool before storing or trans-
porting.
S Store unit and fuel in a well ventilated area
where fuel vapors cannot reach sparks or
open flames from water heaters, electric
motors or switches, furnaces, etc.
S Store unit with all guards in place. Position
unit so that any sharp object cannot acci-
dentally cause injury.
S Store unit and fuel well out of the reach of
children.
SEASONAL STORAGE
Prepare unit for storage at end of season or if
it will not be used for 30 days or more.
If your unit is to be stored for a period of time:
S Clean the entire unit before lengthy
storage.
S Store in a clean dry area.
S Lightly oil external metal surfaces.
FUEL SYSTEM
Under FUELING ENGINE in the OPERA-
TION section of this manual, see message la-
beled IMPORTANT regarding the use of
proper fuel in your engine.
Fuel stabilizer is an acceptable alternative in
minimizing the formation of fuel gum deposits
during storage. Add stabilizer to the gasoline
in the fuel tank or fuel storage container.
All manuals and user guides at all-guides.com
If you require further assistance or are unsure
about performing this procedure, contact an
authorized service dealer or call customer
support.
STORAGE
Follow the mix instructions found on stabilizer
container. Run engine at least 5 minutes after
adding stabilizer.
ENGINE
S Remove spark plug and pour 1 teaspoon of
S Replace spark plug with new one of recom-
S Clean air filter.
S Check entire unit for loose screws, nuts,
S At the beginning of the next season, use
OTHER
S Do not store gasoline from one season to
S Replace your gasoline can if it starts to rust.
13
HELPFUL TIP
During storage of your gas/
oil mixture, the oil will sepa-
rate from the gas.
We recommend that you
shake the gas can weekly
to insure proper blending of
the gas and oil.
50:1, 2-cycle engine oil (air cooled) through
the spark plug opening. Slowly pull the
starter rope 8 to 10 times to distribute oil.
mended type and heat range.
and bolts. Replace any damaged, broken,
or worn parts.
only fresh fuel having the proper gasoline to
oil ratio.
another.