Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SERVICE AND ADJUSTMENTS
REPLACING THE LINE
1. Press the tabs on the side of the trimmer
head and remove cover and spool.
Tab
Cover
Spool
2. Remove any remaining line.
3. Clean dirt and debris from all parts. Re-
place spool if it is worn or damaged.
4. Replace with a pre-wound spool, or re-
place line using a 25 feet (8 meters)
length of 0.080 inch (2 mm) diameter line.
WARNING:
Never use wire, rope,
string, etc., which can break off and become a
dangerous projectile.
5. When installing new line on an existing
spool, hold the spool as shown.
All manuals and user guides at all-guides.com
6. Bend the line at the midpoint and insert
7. With your finger between the lines, wrap
Tab
8. Position the lines in the guide slots.
9. Place the spool in the cover as shown
11
the bend into the slot in the center rim of
the spool. Ensure line snaps into position
in the slot.
the lines evenly and firmly around the
spool in a clockwise direction.
Guide slot
below.
Slot
Guide slot
Tabla de contenido
