Elvox 88TK Manual Para El Conexionado Y El Uso página 20

All manuals and user guides at all-guides.com
Management/description of the 88TK and 800T parameters for the DataOrganiser software
applications (using the additional field associated with the transponder key to save to memory)
DataOrganiser, referring to the article at issue (88TK, 800T), presents the following type of screen if
the transponder reader has no key stored in memory:
For full use of the tool functions, please refer to the manual/on-line help. This section describes the
use of DataOrganiser with one additional parameter in the field TYPE1 (TIPO1) (cfr. figure above)
used to provide an additional function: the transmission of a DigiBUS standard packet in which the
transmission packet identifier field gives the sum of two values: Packet identifier = Transponder
DigiBUS identifier + numerical value set in field TYPE1 (TIPO1) (see column IV in the figure above)
This use is for special applications in which the transmitted information is coded so as to extract infor-
mation for targeted executions/piloting.
If the TxPacket (liftDGB) and TxPacket (DGB) fields are enabled for the CFG TRANSPONDER para-
meter (values set with the PC DigiBUS Analyser 2 tool), the written values (significant values in the
range from 1 to 63) in the field shown in the figure are added to the DigiBUS identifier and given in the
identifier transmitted by the DigiBUS standard packet with the field set by the DIGIBUS COMMAND
parameter (value set with the PC DigiBUS Analyser 2 tool), see the following figure::
20