Idiomas disponibles
Idiomas disponibles
up the power levels from 0 to 9 (max power) in numerical
order. Pressing the "-" key will take the power straight from
0 to 9 . Pressing the "-" key again will reduce the power
level.
4. To adjust the power level at a later stage select the de-
sired cooking
5 . Select the cooking zone , press "-" to reduce the power
level to 0 , the cooking zone will be turned off.
Safety mode (Child lock)
You can lock the controls to prevent unintended use (for ex-
ample children accidentally turning the cooking zones on).
When the controls are locked, all the controls except the
OFF control are disabled.
To lock the controls
Touch the key (E) «
will show «Loc»
To unlock the controls
1. Make sure the hob is turned on.
2. Touch the key (E) «
3. You can now start using your hob.
When the hob is in the lock mode, all the controls are
disable except OFF, you can always turn the hob off with the
OFF control in an emergency, but you shall unlock the hob
first in the next operation.
Using the timer
You can set the timer to turn one cooking zone off after the
set time is up.
You can set the timer for up to 120 minutes.
1. Select the relevant cooking zone which is working by
touching the zone select key (A).
2. Press the Timer key (F) «
es, and you can set the timer at this point.
3. Press the «+» and «-» keys, you can set the timer from 1
to 120 minutes.
4. When the time is set, it will begin to count down inme-
diately. The display will show the remaining time and the
timer indicator flash for 5 seconds.
5. When cooking timer expires, the corresponding cooking
zone will be Switch off automatically and buzzer 3 times.
6. If 2 burners are at work, when one burner has the timing,
it will always display the burner working level and time, if 2
burners both have timing, but just only display burner work-
ing level and time for the last action.
» for 3 seconds. The timer indicator
» for 3 seconds.
», th timing indicator flash-
Using the Double Rings
It is possible to control double rings.When a dual cooking
zone is activated,the two circuits are switched on at the
same time.Activation of the external circuit is indicated by a
pilot light upon the key（G） .If only the internal circuit is
to be switched on, the external circuit can be switched off
using the dual circuit key (G)
(G)
again to reactivate the external circuit and the
corresponding pilot light will switch on.
Automatic off
Once switched on, the touch control automatically switches
off after 20 seconds of inactivity. After selecting a cooking
zone, the automatic off time is divided into 10 seconds, after
which the zone is deselected and, after another 10 seconds,
the touch control switches off.
Switching all cooking zones off
Press the ON/OFF (D) button to immediately switch off all
zones at any time. In standby mode, an "H" is displayed in
all cooking zones that are "hot". The remaining displays will
be switched off.
Setting level
The cooking zone can be set to 9 levels that are indicat-
ed by the numbers "1" to "9" on the seven-segment LED
displays .
Residual heat indicator
This informs the user that the glass is at a dangerous tem-
perature in the event of touching the area located around
the cooking zone. The temperature is determined by a
mathematical model and any residual heat is indicated by a
"H" on the corresponding 7-segment display.
Heating and cooling are calculated based on:
· The selected setting level (between "0" and "9")
· The ON/OFF time.
After switching off the cooking zone, the corresponding dis-
play will indicate "H" until the temperature in the zone has
dropped below the critical level (≤ 60°C).
.Press the dual circuit key
