Engine Operation - Eco-Flo WG20 Manual Del Propietário

FILL WATER
Before starting the engine, remove the filler plug from the pump chamber
and completely fill the pump chamber with water. Reinstall the filler plug
and tighten it securely.
TURNING THE ENGINE ON
• The ignition switch (1) controls the ignition. Move it to the ON position to start
the engine. The same control is used to stop the engine.
• Adjust the choke lever (3).
• Pull the recoil starter grip (2) on the recoil starter.
NOTE: Before starting a cold engine, you MUST move the choke lever (3) to
the left (closed). As the engine warms up, move it towards the right (open).
A warm engine should start with the choke open.
STOPPING THE ENGINE
• Stop the engine by turning the ignition switch (1) to OFF.
• Move the fuel valve lever (2) to OFF (left).
For parts or assistance, call ECO-FLO Customer Service at 1-877 326-3561

ENGINE OPERATION

8
3
3
1
1
2 2
2
2
FILLER PLUG
1
1
1