Eco-Flo WG20 Manual Del Propietário página 10

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

REPLACEMENT OF LUBRICATING OIL
Run the pump with water for five (5) minutes and then shut it down before replacing the engine's lubricating oil. This
ensures the quick and complete release of the lubricating oil.
o Check if the oil tank cover is tightened.
o Unscrew the engine oil plug and tilt the engine
towards the cylinder head cover, drain the oil
into an appropriate container and then screw up the
engine oil plug.
o Unscrew the oil fill and dipstick, fill the recommended
lubricating oil through the oil filler and check the
oil level (no more than 600 ml)
PRECAUTIONS:
o It is recommended to replace the lubricating oil when there is no or little fuel in the fuel tank in case the fuel
overflowing from the fuel tank when the engine is tilted.
o In case of lubricating oil overflowing, make sure to wipe off the oil. Wash hands with soap and water or detergent
after contacting the lubricating oil, and then wash hands with clean water.
o Please dispose the waste lubricating oil and containers with methods in compliance with environmental protection
requirements. It is suggested to store the waste lubricating oil into a sealed container and deliver it to the local
waste oil recycle bin for treatment. It is forbidden to directly throw into the dustbin or pour it into water drain.
MAINTENANCE OF AIR FILTER
The function of the air filter is to filtrate impurities and dust in the air so as to mix clean air with fuel for the sake of
stable engine performance. The dirty air filter will make the impurities and oil stains cover the element of the air filter,
reduce the air capacity required by the combustion of gasoline engine and cause the disproportion of gas mixture,
abnormal combustion and engine performance attenuation.
DO NOT USE GASOLINE OR CLEANING AGENT WITH LOW IGNITION POINT TO CLEAN THE FILTERING
ELEMENT OF THE AIR FILTER, AS A FIRE OR EXPLOSION MAY OCCUR.
SOME SOLID IMPURITIES OF HIGH HARDNESS DIRECTLY INTO THE COMBUSTION CHAMBER OF THE
ENGINE WILL CAUSE IRRETRIEVABLE FATAL DAMAGE TO THE ENGINE. THEREFORE, THE MAINTENANCE
FREQUENCY SHALL BE INCREASED IF THE ENGINE IS USED AT A PLACE WITH HIGH DUST CONTENT.
IT IS STRICTLY PROHIBITED TO OPERATE THE GASOLINE ENGINE IN THE CASE OF NOT INSTALLING THE FIL-
TERING ELEMENT OF THE AIR FILTER AS IT MAY ACCELERATE THE WEAR AND DAMAGE OF THE GASOLINE
ENGINE.
o The air filter of the engine is of a double-element structure (foam + paper).
For the purpose of inspection, remove the air filter casing and take out the
filter element. The damaged filter element shall be duly replaced and
usually replaced once during maintenance.
o CLEANING THE FOAM FILTER ELEMENT: Wash the foam filter element
with cleaning agent, swish it after cleaning with fresh water, and air dry
before operation.
o CLEANING THE PAPER FILTER ELEMENT: Lightly
beat the filter element several times, and blow air from
inside to the outside with compressed air (nor exceeding
30 psi). Never use items such as a brush to clean the
paper filter element.
For parts or assistance, call ECO-FLO Customer Service at 1-877 326-3561
REPAIR AND MAINTENANCE
PAPER FILTER ELEMENT
10
AIR CLEANER BASE
ENGINE OIL PLUG
AIR CLEANER COVER
FOAM FILTER ELEMENT
Tabla de contenido
loading

Tabla de contenido