Uline H-9234 Instrucciones De Montaje página 2

IMPORTANT! Before setting up tent, contact
Diggers Hotline (8-1-1) or a local authority to
verify that it is safe to set up tent in desired
location. Be aware of weather conditions, and
always evacuate tent during periods of high
winds or lightning.
1. Ensure all parts are present before assembly. Lay
frame parts on ground in approximate locations
they will be when frame is assembled. (See Figure 1)
5'
7'
LG
EV
EV HR
20'
FR
EV
HR
EV
2. Place frame pins in 8-way crown.
a. Each protrusion on crown has two holes. The
alignment hole is closer to the center; the
placement hole is further down the protrusion.
(See Figure 2)
Figure 2
8-Way Crown
Alignment Hole
PAGE 2 OF 24
Figure 1
LG
20'
EV
FR HR EV
FR
EV
FR HR
EV
Placement Hole
ASSEMBLY
b. Place a pin in every other alignment hole. Pin
prevents rafter from moving too far onto 8-way
crown. (See Figure 3)
Figure 3
Alignment
Hole
3. Align four hip rafters (HR) with 8-way crown.
(See Figure 4)
HR
HR
a. Slide hip rafters (HR) onto protrusion until they
meet pin. (See Figure 5)
Figure 5
Pin
Figure 4
HR
HR
0721 IH-9234