Using Alarm Input Terminal As Day/Night Switching - Sanyo VCC-WD8574 Manual De Instrucciones

.  $ %  A 7 5 8 % % 9 &      D Q Q M   T V R ' ' ' ' '  ' 
Specifying Alarm Input

Using Alarm Input Terminal as DAY/NIGHT Switching

1 1
1 1
Set "MODE" to "COLOR".
MEMO: Specify this option when you want the switching between
COLOR and B/W mode to be made by any external
sensor or switch through the alarm input, independent on
the ambient brightness.
Note: • You must specify "COLOR" for the "DAY/NIGHT" mode
to enable this setting. (See page 32)
• The setting will take effect after you exit the settings
screen.
• You can select either "OFF" or "OR" alone for
"MOTION" setting. (See page 41)
43
English
All manuals and user guides at all-guides.com

ALARM IN SETTING
MODE COLOR
POLARITY NO
MOTION OFF
MOTION SET SET
ZOOM OFF
ZOOM TIME 5S
PRESET OFF
MENU BACK
' ' ' '
2 2
2 2
Select "POLARITY" and specify a polarity for the
signal.
POLARITY
Setting
NO
NC
NO: Normal Open (When closed, switches from COLOR to B/W.)
NC : Normal Close (When opened, switches from COLOR to B/W.)
MEMO: For other settings, see pages 38 – 43.
3 3 3 3
Set "MENU" to "END" and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.
Between ALARM
IN and COM Mode
Terminals
Open COLOR
Close B/W
Open B/W
Close COLOR