Tabla de contenido
Idiomas disponibles
Idiomas disponibles
--------------------
11
24. Install two compression washers (10) at the back of
the air flow assembly (1 ), with two M6 x 1.0 x 39
bolts with washers (4) and a 8mm socket.
Torque bolts to 5 N.m.
25. Locate rear cover assembly onto tabs on inlet front
cover of induction assembly base (1) and, rotate
rearward and down and snap to rear ball studs.
26. Install beauty cover (6) using all remaining push
pins saved from the removal of the original
beauty cover.
NOTE: There will be two additional new push
pins (11) to be installed, use these for the two
mounting holes on the base of the new Air
Induction system.
July 19, 2019
www.mopar.com
K6864061AA
Tabla de contenido
