Mopar RAM AIRFLOW Manual Del Usuario página 11

--------------------
22. Place the Air Flow assemby (1) over the air intake
inlet and slide the inlet tube onto the air intake
manifold and torque hose clamp with a 8mm
socket to 4 N.m.
Slide the new MUA tube (7) on under the air
flow assembly (1 ).
Connect the IAT sensor connector on the side
of the air inlet tube.
Align air flow assembly (1) with the front snap
in clips (8) and the back mounting holes with
the rear bracket (3).
23. Install two M6 x 1.0 x 25 bolts (9) at the front of the
air flow assembly (1 ), to the snap clips in the lower
crossover with a 10mm socket.
Torque bolts to 5 N.m.
July 19, 2019
www.mopar.com
lr1-- i
� �
I ..
IAT
� ... CONNECTOR
K6864061AA
O
1