AneX m/type Manual Del Usuario página 7

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
PRE-USE PROCEDURES
Stroller assembling/disassembling
Unbox this stroller's frame and put it
horizontally on the floor (Fig. 1). Disable the
lock against accidental unfolding (Fig. 2). Pull
upwards vigorously till the system is secured,
while holding the handle (you should hear a
specific sound) (Fig. 3, 4). Press the button
on the right lever arm of the frame to fold the
frame. After that, simultaneously pull the lever
arms on both sides of the frame all the way
in (Fig. 5). Next, slightly push the frame down
to restore it to the initial position it had at
the moment of unfolding the stroller (Fig. 1).
For easy and efficient use, through the same
sequence of operations, the frame can be
folded together with the seat without taking
the seat unit off the frame. This is upon the
condition that the seat is facing in the direction
of travel, the footrest is in the lowest position,
the hood is folded, and the stroller's handle is
turned down (Fig. 6).
Handle height adjustment
Simultaneously press the round buttons,
placed in parallel on both sides of the handle.
Set a comfortable handle height for you (Fig. 7).
Installation and removal
of rear wheels
Before installing a wheel, insert the axis into the
respective spot at the bottom of the frame (until
you hear a distinctive sound) (Fig. 8). The wheel
should be installed on the axis, then pull it off
slightly until you hear a distinctive click (Fig. 9).
The wheel can be removed both with and without
the axis. Press the button at the bottom of the
All manuals and user guides at all-guides.com
frame to remove the wheel with the axis (Fig. 10).
To remove the wheel without the axis, push the
middle part of the wheel and drag it along the axis
until it comes off completely (Fig. 11).
Installation/removal of the front
swivel wheels/lock
The frame of the stroller is equipped with two
front swivel wheels that rotate at 360°. To fit the
front wheels, the wheel axle must be installed
in the appropriate position on the frame and
pushed up until the system is fixed (Fig. 12).
In order to remove the wheel, press the button.
The wheel is automatically disconnected
(Fig. 13). If you need to fix the swivel wheel
system, press the button above the wheel
(Fig. 14). Additionally, for convenience and
efficiency, you can lock the wheels by pressing
the button by both hand and foot.
Brake
The stroller is equipped with a Parking brake
that fixes the rear wheels (Fig. 15). To stop the
stroller, press the pedal that blocks the rear
wheels (Fig. 15). To continue driving, turn the
pedal to its original position (Fig. 15).
Shock absorption
The stroller has a spring type shock absorption
system and regulated shock absorption on the
frame to improve your baby's comfort (Fig. 16).
To adjust the shock absorption system on the
frame, turn the adapters according to the road
type: flat road (soft mode)/mountain road (hard
mode) (Fig. 16). Always adjust both sides similarly.
EN
7
Tabla de contenido
loading

Productos relacionados para AneX m/type

Tabla de contenido