SETTING
❏
System time setting (24-hour)
❖
: before setting, tie the end of the rope to the door and make sure the rope is tight. If the rope is loose, the internal rope
may get stuck.
Press any key to light up the screen, and then press
➢
Press
➢
Press
➢
Opening the height calibration).
Opening height calibration
❖
: both STEP 01 and 02 need to be completed. If both are skipped, the previous setting will be maintained. If you
encounter an E4 error, please perform a reset and start again.
The icon
➢
adjust the door height until the door fully opened.
○
Closing height calibration
❖
The icon
➢
the door height until the door is fully closed.
○
Opening mode setting
❖
The icon
➢
between the various modes, the top icons
to set the hour when the hour flashes, press
to set the minute when the minute flash, press
is displayed, and the opening Gif is displayed on the right as shown below. Press
Press
to save and enter the next step (02 Closing height calibration).
is displayed, and the closing Gif is displayed on the right as shown below. Press
Press
save and enter the next step (03 Opening mode setting).
is displayed, and the coop door icon is fully open, as shown below. Press
to enter the settings.
to save and enter the minute setting.
to save and enter the next step (01
OPENING
CLOSING
will also change to indicate the selected mode.
to
to adjust
to switch
4