PNI DK220 Manual Del Usuario página 22

The PIN does not
open the door
No answer after
reading the card
The keypad does not
light up
Invalid master code
Reset the master code
1. Turn off the power to the access control keypad.
2. Hold down the # key while restarting the power.
3. After hearing two Di . sounds, release the # key.
4. The keypad has returned to the factory settings. The master
password returns to 999999. The user data has not been deleted.
1. You have used
PIN 1234
2. The set access
mode does not allow
PIN access
The keypad is not in
standby, it can be in
programming mode
Wrong keypad
settings
You forgot the
master code
22 - User manual
1. Change your PIN.
2. Change the
access mode: card
or PIN.
Press the * key, the
LED flashes. The
keypad is now in
standby mode.
1. Set the key
backlight to on or
on. In auto mode,
the keys only light
up after they are
pressed and remain
lit for 30 seconds.
Reset the device.
The master code
returns to 999999.
By reset the user
data is not deleted.