User Operations - PNI DK220 Manual Del Usuario

11. The operating mode and transmission format of the keypad are set
at the factory. The user can change these settings as needed. After
resetting the device, this setting remains unchanged.
12. After successfully registering users in Zone 1, the LED turns
green. After successfully registering users in Zone 2, the green LED
flashes.
5. Master card operations
Add user for Zone 1
Read the master add card, then Read the user cards one after the other,
and finally Read the master add card again.
Delete user for Zone 1
Read the master delete card, then Read the user cards one after the
other, and finally Read the master delete card again.

6. User operations

By card
Read the card. The lock will unlock.
If you have set multiple cards for the door opening (between 2 and
10), read all the cards one after another within 5 seconds, after which
the lock will unlock.
By card + PIN
Read the card, input the PIN (4 or 6 digits) +#. The lock will unlock.
17 - User manual