Before The First Use - Cilio CLASSIC Manual De Instrucciones

Before the first use

· Read through the operating instructions and safety advice carefully first.
· Remove all packaging material and dispose of it properly.
· Rinse the interior of the kettle with warm water. Wipe the outside with a soft cloth, slightly moistened if
needed. Thoroughly dry the kettle off afterwards.
· Caution: Do not use any caustic liquids or abrasive cleaning agents.
· Unwind the cable completely and insert the plug into a suitable socket.
· Fill the kettle with cold water up to the MAX - marking, close the lid completely and boil the water. Pour
this water away and repeat this procedure 2 – 3 times.
· The water kettle is ready for use now.
Use
· Place the base of the water kettle on a suitable surface (not on a metal surface; not on fabrics etc.).
· Open the lid by pressing the button.
· Make sure that the removable limescale filter is installed properly.
· Hold the kettle only by the handle and pour the desired amount of water (between 500 ml and MAX) and
close the lid until it clicks into place.
· Hint: For hygienic reasons always use fresh water.
· Place the kettle on the base plate and insert just now the power plug into a suitable socket. An acoustic
signal will sound and all control lamps will light up at the same time.
· The preset temperature is 100 °C. By repeatedly pushing the selection button you can change the preset
temperature. One control lamp shows the set temperature.
· Press the ON/OFF button to start the cooking process.
· To end the cooking process prematurely press the ON/OFF button.
· To change the temperature press the ON/OFF button. Then select the desired temperature by repeatedly
pushing the selection button and press the ON/OFF button to start the cooking process.
· As soon as the water has reached the preset temperature, an acoustic signal will sound and the kettle
switches off automatically.
13