Excalibur RES10 Manual Del Usuario página 8

SETTING the DEHYDRATOR:
WELCOME & HOME Screen:
1. Plug electrical cord into back of unit.
2. Then plug electrical cord into electrical outlet.
3. With the front of the unit facing you, reach to the LEFT, top, back side of the unit.
4. Flip the power switch to on.
5. The Welcome screen will appear.
6. A few seconds later, the HOME Screen will appear with 2 options:
> Dry It
My Recipes
SETTING 1 time / 1 temperature
Set zone A for 1 time and 1 temperature.
•
OR Set zone B for 1 time and 1 temperature
•
OR Set zone A+B for 1 time and 1 temperature.
•
Dry It
With the > next to press
1 time / 1 temp
With the > next to
To change the hour, using the control panel, touch the > to move the cursor under the 1. When the cursor is blinking under the 1,
press the to increase the hours. To decrease, press the on the control panel.
When time setting is complete, press until the cursor is no longer blinking under the Hour or Minute field.
To Set the Temperature, press the on the control panel. The selection will move to > Set Temp.
To change the temperature, using the control panel, touch the > to move the cursor under the temperature #. When the cursor is
blinking under the #, press the to increase the degrees. To decrease degrees, press the on the control panel.
When temperature setting is complete, press .
To START the drying process, press the on the control panel. The selection will move to > Start. Press .
After you press START, select the zone you want to set. Press the or on the control panel to scroll thru the options. When the >
is on the zone you want, press to selection. Zone A only (top 5 trays), zone B only (bottom 5 trays) or zone A+B (all 10 trays).
to Select the DRY IT option. The next screen will appear:
press to Select the 1 time / 1 temp setting option. The next screen will appear: