Excalibur RES10 Manual Del Usuario página 10

After you press START, select the zone you want to set. Press the or on the control panel to scroll thru the options. When the >
is on the zone you want, press to selection. Zone A only (top 5 trays), zone B only (bottom 5 trays) or zone A+B (all 10 trays).
After you choose the ZONE, the next screen will show you the Cycle 1's Remaining Time and Set Temperature.
Once Cycle 1 is complete, the screen will show you Cycle 2's Remaining Time and Temperature.
At any time during the drying process, you can move the cursor to change the time or temperature for the current cycle running.
If you choose CANCEL SESSION, next screen lets you confirm yes or no.
SETTING 2 Zone
This setting is used to set zones to run at a unique setting of time and temperature.
Set zone A for 1 time and 1 temperature or Set zone A for 2 time and 2 temperature.
•
AND Set zone B for 1 time and 1 temperature or Set zone B for 2 time and 2 temperature.
•
From the Home Screen, with the > next to
2 zone
With the > next to
You will first set Zone A as either 1 time / 1 temp or 2 time / 2 temp. Follow the instructions as noted in previous section.
After you set Zone A's temperature, you will scroll down to select > Zone B.
You will then set Zone B as either 1 time / 1 temp or 2 time / 2 temp. Follow the instructions as noted in previous section.
After you set Zone B's temperature, you will scroll down to either > EDIT Zone A or > Start. To START the drying process, have the
selection > Start. Press .
Dry It
press
press to Select the 2 zone option. The next screen will appear:
to Select the DRY IT option. The next screen will appear: