Tabla de contenido
Idiomas disponibles
Idiomas disponibles
19
20
22
3
2
1
24
8
PHASE 2: TODDLER
SAFETY HARNESS
• Whenever a child is placed in the seat, ensure the
safety harness is correctly fitted.
• The shoulder straps can be set at two different height
positions. Choose the position closest to the top of the
child´s shoulders.
19. Set up harness
Take each harness attachment and slide off the
bottom part. Push the harness attachment through its
corresponding hole in the seatpad and the seat. Zip
open the seat and slide the bottom part onto the harness
attachment from the inside of the seat until it clicks in
place.
20. Buckle up
Push the shoulder strap buckles into the buckle slot until
it clicks. Pull the loose ends on the shoulder straps to fit
the harness snugly around the child.
21. Buckle down
Push the central buckle button to release the harness.
21
SEAT
• The seat is suitable for children from the age of 6
months and up to 17 kg.
• The seat can be attached either forward facing or
backward facing.
• Attach the seat to the upper part of the chassis, not to
the lower part.
22.Attach seat
Lower the seat onto the chassis until it clicks in place.
23. Remove seat
23
Press the two seat release buttons on both sides of the
seat and lift it up.
24. Adjust seat angle
Pull up the lever on the top of the seat, and rotate the
seat into the desired angle.
25. Adjust height of seat
• There are two height positions for the seat.
Press the height adjustment buttons on both sides of the
chassis and move the seat up or down.
25
PHASE 3: TODDLER + BABY
• To use kobi for a baby and a toddler, it is required to
purchase the second seat. This second seat does not
have a carrycot inside.
CARRYCOT + SEAT
• Set up the carrycot as described on page 7.
26. Attach carrycot
Make sure the rear seat fixings on the chassis are in
position 1. Position the carrycot so that the angle
adjustment lever is facing backwards.
Rotate the brackets into position II (see also
Click the carrycot onto the lower part of the chassis.
27. Attach seat
Make sure the front seat fixings on the chassis are in the
high position. Position the seat so that it is facing forward.
Click the seat onto the upper part of the chassis.
PHASE 4: TWO TODDLERS
26 + 27
• To use kobi for two toddlers it is required to purchase
the second toddler seat. This second seat does not
have a carrycot inside.
• The second seat comes with XL mudguards. For the
safety of your child please make sure to use these XL
mudguards.
• WARNING
always place the heavier child in the front seat.
Never place a child in the rear seat without a child in
the front seat.
28
TWO SEATS
28. Attach XL mudguards
Slide off the small mudguards (see
them with the XL mudguards.
29. Attach rear seat
Make sure the rear seat fixings on the chassis are in
position 2. Rotate the brackets into position I (see
Click the seat onto the lower part of the chassis.
30. Attach front seat
Click the seat onto the upper part of the chassis.
29 + 30
ENG
fig.
14).
: When using kobi for two toddlers,
fig.
2) and replace
fig.
14).
9
Capítulos
Tabla de contenido
