Navigating The Menu - Philips HF3670 Manual Del Usuario

English
12
Setting up your appliance without the app
Hello

Navigating the menu

humidity sensors might not represent the temperature / humidity of the entire
room.
You can set up the Sleep & Wake-Up Light without the app. Before you can use
the appliance, a setup wizard on the appliance needs to be completed first. You
can connect the appliance to the app later.
We strongly recommend you to set up your appliance with the SleepMapper
app in order to enjoy all functionalities the app offers.
1 Start the setup wizard by tapping on the start icon on the display of the
appliance.
2 You will be guided through the setup wizard on the appliance, where you
set the desired settings, a wake-up profile and a winddown program.
Note: The wake-up profile and the wind-down program can be set later. Skip
these settings by tapping the arrow repeatedly. However, we advise you to set
your wake-up profile and your wind-down program during this setup. This can
help you explore the different functions of the appliance.
If you have set up your appliance with the help of the SleepMapper app or
through the setup wizard (see 'Setting up your appliance without the app') on
the appliance, you will see the menu as described in the following sections.
On the display of the appliance you can select and set the wake-up profile,
bedside lamp, settings, sound (source) or the wind-down program.
Note: If the display is blank, move your hand towards the lower part of
appliance to show the display menu. You will see the menu icons.
Confirming and saving settings
All your personalized settings and profiles will be permanently stored in the
memory. You can change them at any time. Press the check mark icon to
confirm and save the desired profile or setting change in any menu.
Note: Your personalized settings and profiles will not be lost, if you remove the
adapter from the electrical outlet.