Aqua Medic Xenia 65 Manual De Instrucciones página 8

Ocultar thumbs Ver también para Xenia 65:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
in until the a.-m. maximum is reached. Take care that enough space is left so that the inflowing water in case
of failure or shutdown of the circulation pump still fits into the filter tank.
If the overflow produces splashing noises, the drain easy drain (Fig. 2, No. 5) should be closed in small
increments (clockwise rotation) in order to increase the water flow in the overflow. At least in the initial phase,
it has to be checked regularly and readjusted, if necessary. Only make quarter turns and then wait at least 5 -
10 minutes so that the system has sufficient time to compensate. Attention: the water level in the filter
tank changes. If the drain is closed too much, the water flows into the filter tank via the emergency overflow.
The cables of circulation pumps or other parts mounted in the aquarium can be routed through the empty
conduit downwards. If a plug is too big for this, the profile slid onto the rear panel can be cut with a PUK saw
so that cables can be led out of the aquarium at the back. The back side should, however, remain closed to
allow the fan to suck in air in the aquarium and not from the outside.
To be able to take the filter tank out of the cabinet, first of all the cabinet's cover plate between the doors has
to be removed (loosen screws).
Xenia 100/130 and 160 have a mechanical refill for evaporated water.
Fig. 4: Floating gauge for refill
Fig. 5: 1. Canister 2. Tap 3. Hose 4. Feedthrough to the filter tank
8
loading

Este manual también es adecuado para:

Xenia 100Xenia 130Xenia 160