English • Owner´s manual
WARNING
The reverse gear cannot be used whon the hoes blades of the rotary hoe are spinning, thus with the PTO
engaged.
Turning the handle.bars (Fig. 13)
Proceed as {ollows to turn the handle-bars through 180":
1) Remove the stop plugs (A) that respectively lock the gearshift control rod (1 ) and the PTO control rod
(2) (Fig.13).
2) Pull the handle-bar release lever (5) forwards and turn the handle-bars through 1800 following the
direction indicated on the sticker on the column.
3) After having turned the handle-bars 1800, pull lhe release lever (5) towards the driver. 4) Fit the plugs
(A) back on to their respective
WARNING
Since the machine is able to reverse, the PTO and gearshift controls will be inverted owing to the effect
of rotation when the handle-bar is turned through 1800 {see sticker on panel).
56
Fig.12 - Safety device in the "WALKING TRACTOR
WITH FRONTAL IMPLEMENT" position. The rotary
hoe cannot be coupled in this position.