00GB_AV505D_EngOM.book Page 37 Saturday, November 24, 2007 5:53 PM
Q
Why does the GREEN Active Standby LED
sometimes take longer to go out?
A
When put into standby the television's active standby
will automatically search all available channels for
downloads, provided Auto upgrade is On. The time
it takes to do this may vary.
Q
Why are the colours wrong when an NTSC source is
played?
A
Connect the source via a SCART lead and play.
Select Manual setting from the SET UP menu.
Manual setting
Colour system: Auto
EXT2
A
Store
OK
Back
MENU
EXIT
a
Set the Colour to Auto and exit.
b
Go to the Picture settings menu and adjust the tint.
Q
Why don't the devices connected via HDMI operate
properly?
A
Make sure to use cables with the HDMI logo
(see page 8).
Some early HDMI equipment may not work properly
with the latest HDMI TV products, due to new standard
adoption. Try Lip Sync setting to Off.
V C R
Watch TV
37
PROBLEM SOLVING