Care And Maintenance - Minebea Intec Midrics MIS1 Serie Instalación E Indicaciones De Seguridad

Care and Maintenance

Cleaning
! Never use concentrated acids, alkali solutions, solvents or pure
alcohol to clean the equipment.
$ Do not allow liquids to penetrate the scale housing.
$ Use a brush or a soft, dry, lint-free cloth to clean the scale.
Storage and Shipping Conditions
$ The packaging used for shipping your Minebea Intec equipment
is optimally designed to prevent damage during transport.
It is a good idea to save the box and all parts of the packaging
for future storage or shipment of the equipment. Only the
original packaging provides the best protection for shipment.
$ Allowable storage temperature: –20°C to +75°C (–4°F to +167°F)
$ Allowable humidity during storage: max. 90%
$ Please see also the information under "Safety Inspection,"
below.
Safety Inspection
If there is any indication that safe operation is no longer
warranted; for example:
– If there is visible damage to the connecting cable,
– If the equipment no longer functions properly,
– If the equipment has been stored for a relatively long period
under unfavorable conditions,
– If the equipment has been subjected to rough handling during
shipment,
§ Make sure all warnings and safety precautions are observed, and
notify your nearest Minebea Intec Service Center or the Inter-
national Technical Support Unit based in Bovenden, Germany.
Maintenance and repair work may be performed only by autho-
rized Minebea Intec service technicians who have access to the
required maintenance manuals and have received the necessary
training.
The seals affixed to this equipment indicate that only authorized
!
service technicians are allowed to open the equipment and per-
form maintenance work so that safe and trouble-free operation
of the equipment is ensured and the warranty remains in effect.
8 Installation Instructions and Safety Information
Recycling
In Germany and many other countries (see www.minebea-intec.
com,
> Services > Downloads for details), Minebea Intec or the orga-
nization contracted by us takes care of the return and legally
compliant disposal of its electrical and electronic equipment
on its own.
In countries that are not members of the European Economic
Area (EEA) or where no Minebea Intec subsidiaries or dealerships
are located, please contact your local authorities or a commercial
disposal operator.
These products may not be placed with the household waste
or brought to collection centers run by local public disposal
operations – not even by small commercial operators.
For disposal in Germany and in the other member nations
of the European Economic Area (EEA), please contact our service
technicians on location or our Service Center in Bovenden,
Germany:
Minebea Intec Bovenden GmbH & Co. KG
Leinetal 2
37120 Bovenden, Germany
WEEE-Reg.-Nr. DE58091735
Prior to disposal and/or scrapping of the equipment, any batter-
ies should be removed and disposed of in local collection boxes.
Minebea Intec will not take back equipment contaminated with
hazardous materials (ABC contamination) – either for repair or
disposal.
Please refer to the accompanying leaflet/manual or visit our
Internet website (www.minebea-intec.com) for comprehensive
information that includes our service addresses to contact if you
plan to send your equipment in for repairs.
If you no longer need the packaging after successful installation
of the equipment, you should return it for recycling. The pack-
aging is made from environmentally friendly materials and is
a valuable source of secondary raw material.
The equipment, including accessories and batteries, does not
belong in your regular household waste.