Stop Mode - Lenco TCD-974 Manual De Instrucciones

Tocadiscos con cd/mp3 radio pll y codificación usb/sd
Tabla de contenido
HINTS FOR BEST RECEPTION: -
-
AM: THE RECEIVER HAS A BUILD-IN AM BAR ANTENNA. IF AM RECEPTION IS WEAK, SLIGHT ROTATE OR
RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.
-
FM: THE RECEIVER HAS A BUILD-IN FM WIRE ANTENNA (25) HANGING AT THE REAR CABINET. THIS
WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR THE BEST RECEPTION.
PLAYING COMPACT DISC
 GETTING START
1.
PRESS FUNCTION BUTTON (4) TO SELECT "CD" MODE.
2.
PRESS "CD TRAYOPEN/CLOSE" BUTTON (18) TO OPEN THE CD TRAY (12).
3.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CD TRAY.
4.
FOCUS SEARCH IS PERFORMING, THE LCD DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF TRACKS &
TOTAL PLAYING TIME.THEN WILL START PLAYBACK AUTOMATICALLY.
 PLAY / PAUSE MODE
1.
TO INTERRUPT, PRESS THE "
&FLASING ON THE LCD DISPLAY (2). PRESS AGAIN TO RESUME NORMAL PLAYBACK.
 STOP MODE
1.
IF "STOP
" BUTTON (13) IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO STOP
MODE.
 SKIP MODE (SKIP UP
1.
DURING PLAY OR PAUSE MODE, IF "SKIP UP
AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2.
DURING PLAY OR PAUSE MODE, IF "SKIP DOWN
BEGINNING OF THE TRACK, ORIGINAL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
3.
AFTER STEP 2, PRESS "SKIP DOWN
REMAIN THE PLAY OR PAUSE MODE.
FOR MP3 DISC
1.
AFTER FOCUS SEARCH IS PERFORMING, THE TOTAL NUMBER OF TRACK AND ABLUM WILL BE SHOWN
ON THE LCD DISPLAY (2).
2.
PRESS "FOLDER/ PRE-UP " (15) TO SELECT THE ALBUM NUMBER.
3.
PRESS "SKIP UP
4.
WHEN THE DESIRED TRACK AND ALBUM IS BEING SELECTED, PRESS THE"
PLAYBACK.
ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET)
PRESS THE "INFO" BUTTON UNTIL THE LCD DISPLAY (2) SHOW "FILE -..." DURING PLAYBACK OF MP3/WMA
FILE, THE SONG TITLE / ARTIST NAME / ALBUM NAME IS BEING DISPLAYED IN SEQUENCE. PRESS THE
"INFO" BUTTONAGAIN TO DISABLE THE FUNCTION.
REMARK:-
-
IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, "NO TITLE" OR "NO ARTIST" IS
BEING DISPLAYED" ON LCD DISPLAY (2).
-
NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MASS MEDIA IS NOT
SUPPORTING BY THE SYSTEM.
-
THE SYSTEM SUPPORT ONLY ENGLISH AND NUMERAL FOR ID3 FUNCTION
SONG TITLE/FOLDERNAME SEARCH FUNCTION (BY REMOTE HANDSET)
YOU CAN SEARCH THE TRACK BY THE TITLE/FOLDER NAME IN DISC DURING STOP OR PLAYBACK MODE:-
1.
PRESS THE " FIND " BUTTON ONCE, THEN PRESS THE "SKIP UP
YOU CAN SEARCH THE TITLE OF EACH SONG ONE BY ONE UNDERALPHABET ORDER & THE NUMBER
(A TO Z & THEN 0 TO 9) ORDER ON LCD DISPLAY (2), THEN PRESS THE "
PLAYBACK OF THE SELECTED TRACK.
2.
PRESS AGAIN "FIND" BUTTON, THE FOLDER NAME IS BEING DISPLAYED. THEN PRESS THE "SKIP UP
OR SKIP DOWN
TO START THE PLAYBACK OF ALL TRACKS INSIDE THAT SELECTED FOLDER.
" BUTTON (14) ONCE, AND THE PLAYING TIME WILL BE FREEZE
/ SKIP DOWN
" BUTTON (17) AGAIN WILL GO TO THE PREVIOUS TRACK AND
" OR "SKIP DOWN
BUTTON (17), TO SELECT THE DESIRED FOLDER, AND PRESS THE "
)
" BUTTON (17) IS PRESSED. IT WILL GO TO NEXT TRACK
" BUTTON (17) IS PRESSED. IT WILL GO BACK TO THE
" BUTTON (17) TO SELECT THE TRACK NUMBER.
GB- 3
" BUTTON (14) TO START
" OR SKIP DOWN
BUTTON (17),
" BUTTON (14) TO START THE
" BUTTON (15)
"
Tabla de contenido
loading

Tabla de contenido