HH Tensor-GO Manual Del Usuario página 7

EN
14. MAINS INLET SOCKET: IEC
SUPPLY VOLTAGE 100-240V~
POWER CONSUMPTION 300 WATTS
input for connection of the included mains
lead. Tensor-GO contains a universal
mains input for worldwide usage without POWER
the need to change anything except your
BATTERY STATUS
power cord.
MODEL: TENSOR-GO
When powered, the internal lithium
CHARGE LOW 25% 50% 100%
12V DC IN
battery will be charged. The system can be
operated normally whilst charging. CAUTION - RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION - LE RISQUE DE DÉCHARGE ÉLECTRIQUE NE S'OUVRENT PAS
15. MAINS SWITCH: Turns the
system on and off. It is good practice to turn the Master Volume control to minimum when switching on and off . The internal battery
will charge even if the power switch is set to off.
16. 12V DC IN: It is possible to charge your Tensor-GO from an external 12V power source such as a lead acid car battery or
lithium-ion power pack.
17. BATTERY STATUS: The charge LED will illuminate when charging. Battery charge status is indicated by the four LEDs, charge
your Tensor-GO when the low level indicator is lit. For a reliable indication always check the status with the master volume turned
down or any inputs muted.
7
Designed and Engineered in the UK by HH Electronics LTD.
© 2021 HH Electronics Ltd