HH Tensor-GO Manual Del Usuario página 5

SETUP
© 2021 HH Electronics Ltd
A. Tensor-GO Subwoofer and amplifier
B. Two identical spacer pillars
C. Column Loudspeaker
Tensor-Go may be used with either one or two spacer units depending on the unit's position
and your chosen usage. For floor mounted operation, two spacers are recommended.
Position the subwoofer on a stable surface in the desired location, then proceed to fit the
spacer columns by firmly pressing into position. Finally insert the column loudspeaker, ensuring
all joints are firmly pushed into position.
Care must be taken to position the unit to avoid causing a hazard, and ensuring it cannot be
knocked over. If in doubt the unit should be secured in place.
Designed and Engineered in the UK by HH Electronics LTD.
EN
5