Installing The Led Assembly; Installing The Glass Shade - Kichler ARVADA Manual Del Usuario

INSTALLING THE 17W LED ASSEMBLY
Step 1. Whlile holding the LED assembly under the fan , firmly snap
the wire connection plugs together.
Step 2. Place the key holes from the LED assembly over the two screws
previously loosened from the light kit plate. Turn the LED assembly
until it locks in place at the narrow section of the key holes. Secure by
tightening the two screws previously loosened and the one screw
previously removed.

INSTALLING THE GLASS SHADE

Attach the glass shade to the light kit plate by twisting tightly. (DO NOT
OVERTIGHTEN)
Light kit plate
Wire
connections
17w led
assembly
Screw
Fig. 30
Light kit plate
Glass shade
Fig. 31
44 ARVADA