Close-To-Ceiling Fan Mounting Without Downrod - Kichler ARVADA Manual Del Usuario

CLOSE-TO-CEILING FAN MOUNTING WITHOUT DOWNROD

All of the parts, hardware and components such as the hanger bracket and hanger ball have been provided for your safety
WARNING:
and the proper installation of your new ceiling fan. The use of other parts, hardware or components not supplied with the fan will
void the Warranty.
to turn off the power. Follow the steps below to hang your fan properly:
REMEMBER
Step 1. Secure the Hanger Bracket to the ceiling outlet box using the screws provided with your outlet box inconjunction. (Fig. 17)
Step 2. Remove the two Set Screws, the Hitch Pin and Lock Pin from the coupling located on the top of the MotorAssembly. (Fig. 18)
Step 3. Remove the mounting plate from the coupling by removing the three screws. Note: there are six screws on the coupling .
please only need to remove that three screws with arrows pointing (Fig.19)
Step 4.Slip the canopy decorative ring to the fan motor assembly (make sure the slot openings are on top),and then proceed to place
the canopy and locking plate over the coupling at the top of fan motor assembly. (Fig.20)
Step 5. Align the three holes from mounting plate and canopy to the fan motor assembly. Attach the mounting plate and canopy
and fan motor assembly together by tightening the three screws which removed in step 3. (Fig.20)
Outlet box
Hitch
pin
Hanger bracket
Fig. 18
Fig. 17
Screw
Set screws
Lock
pin
Fig. 19
Screw Screws
Mounting
Fan
motor
assembly
Screw
Fig. 20
Canopy
plate
Fan
motor
assembly
44 ARVADA
Screws
Mounting
plate
Canopy
decorative ring