Kichler ARVADA Manual Del Usuario página 14

FINISHING THE INSTALLATION
Step 2. Install the canopy to the hanger bracket by aligning the key
holes in the canopy with the two slotted screws in the hanging
bracket which loosen previously ,then lift the canopy up and turning
clockwise. Re-tighten the two slotted screws and re-install the two
non-slotted screws. Tighten all screws securely.
Step 3. Installing the canopy cover to the canopy by turning clockwise.
Step 4. Installing the decorative ring onto the canopy by pushing it up.
Slotted canopy
mounting screw
Non-slotted canopy
mounting screw
Slotted canopy
mounting screw
Fig. 16
Non-slotted canopy
mounting screw
Canopy
Canopy decorative
ring
Canopy cover