mega macs 56
2. Take the device out of the packaging.
EN
3. Check the device for mechanical damage and shake it slightly to ensure that there are no loose parts inside.
3.2
Intended Use
The mega macs 56 is a mobile device for detecting and rectifying faults in automotive electronic systems.
It uses a diagnostic interface to establish a connection to the automotive electronics and to provide access to
descriptions of the vehicle system. A lot of this data is transferred to the device directly from the Hella Gutmann
diagnostic database via online connection. Therefore, the device must be permanently online.
The device is not suitable for repairing electrical machines and tools or home electrics. Diagnostic devices from other
manufacturers will not be supported.
If the device is used in a way not authorized by Hella Gutmann, the safety of the device may be influenced.
The device is intended for industrial use. Outside of industrial environments, e.g. in commercial areas or in the center
of a town, radio interference suppression measures may be necessary.
3.3
Using the Bluetooth Function
The terms of use of the Bluetooth function may be restricted or prohibited through law or corresponding legal
regulations in certain countries.
Pay attention to the provisions in force in the respective country before using the Bluetooth function.
3.4
Scope of Functions
The range of functions of the mega macs 56 depends on the country, the licenses acquired, and/or the optionally
available hardware. This documentation may therefore describe functions that are not available on the individual
device. Missing functions can be enabled by acquiring a corresponding license subject to charge and/or additional
hardware.
3.5
Operating the Device
The device is equipped with a touch screen display. All menus and functions can be selected and/or activated by lightly
touching with your finger or simply by pressing the arrow keys
32
CAUTION
Danger of short circuit due to loose parts in or on the device
Danger of destruction of the device/the automotive electronics
Never put the device into operation if you suspect that there are loose parts in or on it. Please
contact the Hella Gutmann repair service or a Hella Gutmann trading partner immediately in
this case.
NOTICE
Damage or destruction of the display
Never touch the display using a tool or pointed metal object.
Only use fingers.
.
Product Description
Intended Use