Cembre B1300TEP Manual De Uso Y Mantenimiento página 8

WARNINGS
Do not use the tool for purposes other than those intended by Cembre S.p.A..
Hydraulic pumps do not need and are not equipped with an oil non-return safety system.
For this reason, use in applications different from those intended (for example with hydraulic
jacks, lifting systems or similar) can be dangerous for the operator.
Cembre S.p.A. does not accept any liability arising from the use of its hydraulics tools for
applications different from those listed in its catalogues or other documentation.
The operator should concentrate on the work being performed and be careful to maintain a
balanced working position.
Do not build up pressure if the pump is not connected to the flexible hose and the head as this
may damage the pump quick coupler, precipitating oil seepage.
High pressure flexible hoses are subject to a natural ageing process which can result in a reduc-
tion of performance and safety of the operator, as a result their life span is limited.
Cembre therefore recommends the replacement of the hose within 10 years from the date
printed on the hose.
Keep the pump and flexible hose away from naked flames and sources of heat above 70°C.
Before using the tool, check that the flexible hose and couplings are not damaged.
The factory fitted guards must be in place at each end of the flexible hose.
Do not touch the flexible hose when under pressure.
When using the tool, the flexible hose must be uncoiled and laid out straight.
Before disconnecting the flexible hose, check that the ram of the head is completely retracted,
in order to ensure a sufficient quantity of oil for subsequent operations.
The tool is unsuitable for continuous use and should be allowed to cool down following uninter-
rupted, successive crimping operations; for instance, having exhausted a fully charged battery
in one session, delay battery replacement for a few minutes.
Protect the tool from rain and moisture. Water will damage the tool and battery.
Electro-hydraulic tools should not be operated in pouring rain.
8