Bluetooth Operation - Sharp HT-SBW202 Manual Del Usuario

8
If you wish to turn the sound o , press the
control. Press the button again or press the +/- buttons on the unit or
on the remote control to resume normal listening.
Select equaliser (EQ) eff ect
While playing, press the EQ button on the remote control to select
between preset equalisers.
Each time the button is pressed it will cycle between the EQ functions as
below:
EQ1 – Music (recommended for listening to all types of music)
EQ2 – Movie (recommended for use with movies)
EQ3 – News (recommended for listening to voices)
CUST – Custom (use to set personal bass/treble settings)
NOTE:
Bass/Treble setting is available only in custom (CUST) preset.
EQ default is EQ1 (Music)
CUST default settings Bass/Treble level = 0
To playback from USB media
• Press the button on the soundbar repeatedly or on the remote
control until "USB" appears on the display. Connect the USB memory
device containing MP3/WAV les (drives up to 32GB supported).
• Press the button to start playback.
• Turn o the soundbar before removing the USB memory device.
NOTE
SHARP will not be held liable for any loss of data while the USB memory
device is connected to this unit. Always back up your music before playing
on this product.
Various USB functions (remote control)
To play or pause.
Skip to next song | Press and hold to fast forward.
Skip to song begining | Press and hold to fast reverse.
HDMI (ARC)/OPTICAL/LINE IN
1. Ensure that the unit is connected to the TV or audio device.
2. While in ON mode, press the
the desired mode.
3. Operate your source audio device directly for playback features.
4. Press the +/– button to adjust the volume to your desired level.
TIP:
While in HDMI (ARC)/OPTICAL mode, if there's no sound output from the
unit, you may need to activate PCM signal output on your source device
(eg. TV, DVD or Blu-ray player).

Bluetooth operation

Pair Bluetooth-enabled devices
The rst time you connect your Bluetooth device to this soundbar, you
need to pair your device to this unit.
NOTE:
The operational range between this unit and a Bluetooth device is
approximately 8 meters (without any object between the Bluetooth
device and the unit).
Before you connect a Bluetooth device to this unit, ensure you know the
device's capabilities.
Compatibility with all Bluetooth devices is not guaranteed.
button on the remote
button on the unit repeatedly to select
Any obstacle between this unit and a Bluetooth device can reduce the
operational range.
If the signal strength is weak, your Bluetooth receiver may disconnect,
but it will re-enter pairing mode automatically.
1. Turn on the soundbar by pressing the standby button.
2. Press the
button on the unit repeatedly or button on the remote
control to select Bluetooth mode. Bluetooth mode is activated and unit
will display NObt.
3. Enter the Bluetooth search mode on the device you wish to connect to
the soundbar.
4. Select SHARP HT-SBW202 from the list.
5. Your device and the soundbar will now be connected; and unit will
display bt.
– To disconnect your device, switch o the Bluetooth connection or hold
down button on the remote control for 3 seconds.
TIPS:
• Enter "0000" for the password if requested.
• The player will also be disconnected when your device is moved beyond
the operational range.
• If you want to reconnect your device to this unit, place it within the
operational range.
• If the device is moved beyond the operational range, when it is brought
back, please check if the device is still connected to the unit.
• If the connection is lost, follow the instructions above to pair your device
to the unit again.
Listen to music from Bluetooth device
If the connected Bluetooth device supports Advanced Audio
Distribution Pro le (A2DP), you can listen to the music stored on the
device through the soundbar.
If the device also supports Audio Video Remote Control Pro le (AVRCP),
you can use the soundbar's remote control to play music stored on the
device.
1. Pair your device with the unit.
2. Play music via your device (if it supports A2DP).
3. Use the supplied remote control to control playback (if your device
supports AVRCP).
To pause/resume play, press the
To skip to a track, press the
Troubleshooting
To keep the warranty valid, never try to repair the product yourself. If you
encounter problems when using this unit, review the following before
requesting service/support.
No power
Ensure that the power adaptor is properly connected to the units AC IN
socket and to the mains socket.
Ensure that there is power at the AC outlet.
Press standby button on the remote control or soundbar to turn the
soundbar on.
No sound
Increase the volume. Press Volume Up on the remote control or on the
right side of the soundbar.
Press MUTE on the remote control to ensure the soundbar is not muted.
Press source buttons to select a di erent input source.
When using either of the Digital inputs (HDMI/Optical), if there is no audio:
Try setting the TV output to PCM or
Connect directly to your Blu-ray/other source, some TVs do not
pass through digital audio (the TV's HDMI does not support ARC
functionality).
Your TV may be set to variable audio output. Con rm that the audio output
button on the remote control.
/ buttons on the remote control.