Battery Installation; First Time Installation - Sharp HT-SBW202 Manual Del Usuario

6
used near the unit, it may operate incorrectly. Conversely, the other
products may operate incorrectly.

Battery installation

1. Press the battery compartment cover release clip in the direction of the
arrow and then pull the cover away from the remote.
2. Insert two AAA size batteries (included). Make sure the (+) and (–) ends
of the batteries match the (+) and (–) ends indicated in the battery
compartment.
3. Close the battery compartment cover ensuring the release clip is
secured.

First time installation

Placement and mounting
A
A: Normal placement
(Place soundbar on level surface in front of TV.)
B: Wall mounted
Wall mounting
NOTE:
Installation must be carried out by quali ed personnel only. Incorrect
assembly can result in personal injury and property damage. If you
intend to install this product yourself, you must check for installations
such as electrical wiring and plumbing that may be buried inside the
wall. It is the installer's responsibility to verify that the wall will safely
support the total load of the unit and wall brackets.
Additional tools (not included) are required for the installation.
Do not overtighten screws.
Keep this instruction manual for future reference.
Use an electronic stud nder to check the wall type before drilling and
mounting.
B
1
660 mm
2
660 mm
1. Drill 2 parallel holes (Ø 6 mm) in the wall. The distance between the
holes should be 660 mm.
Firmly x one wall plug into each hole in the wall and then insert
screws into them.
2. Leave a 4mm gap between the wall and the screw's head. Lift the unit
with the attached wall brackets over the heads of the screws and slot
into place.
Connect to power
• Before connecting the power cable, ensure you have completed all other
connections.
• Risk of product damage! Only use the supplied mains cable. Failure to
to do this may result in a safety risk and/or damage to the unit.
• Connect the power cable to the AC IN socket of the unit and then into a
mains socket.
Connections
HDMI (ARC/CEC)
The ARC (Audio Return Channel) function allows you to send audio
from your ARC- compliant TV to your soundbar through a single HDMI
connection. To enjoy the ARC function, please ensure your TV is both
HDMI-CEC and ARC compliant and set up accordingly. When correctly set
up, CEC will allow you to use the TV remote to control basic functions of
the soundbar like on/standby, volume and mute.
Connect the HDMI cable (not included) from unit's ARC/CEC (HDMI)
input to the HDMI (ARC) socket on your ARC compliant TV. Then press
the SOURCE button on the remote control to select ARC (HDMI).
TIPS:
• Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and
ARC must be set to on/active in the TV's settings menu.
(4mm)
(ARC/CEC)