ASROCK H670 PG Riptide Manual De Instrucciones página 24

Serial ATA3 Connectors
Right-Angle:
(SATA3_0:
see p.1, No. 17)(Upper)
(SATA3_1:
see p.1, No. 17)(Lower)
(SATA3_2:
see p.1, No. 16)(Upper)
(SATA3_3:
see p.1, No. 16)(Lower)
USB 2.0 Header
(9-pin USB_2_3)
(see p.1, No. 23)
USB 3.2 Gen1 Headers
Vertical:
(19-pin USB3_6_7)
(see p.1, No. 12)
Right-Angle:
(19-pin USB3_4_5)
(see p.1, No. 15)
Front Panel Type C USB
3.2 Gen2x2 Header
(20-pin F_USB32_TC_1)
(see p.1, No. 14)
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
1
Dummy IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
IntA_PB_D- GND
GND
IntA_PA_SSTX+
IntA_PB_SSTX+
IntA_PA_SSTX-
IntA_PB_SSTX- GND
GND IntA_PA_SSRX+
IntA_PB_SSRX+ IntA_PA_SSRX-
IntA_PB_SSRX-
V Vbus
Vbus V
USB Type-C Cable
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to 6.0
Gb/s data transfer rate.
There is a USB 2.0 header on
this motherboard. This USB
2.0 header can support two
ports.
There are two headers on
this motherboard. Each USB
3.2 Gen1 header can support
two ports.
There is one Front Panel Type
C USB 3.2 Gen2x2 Header
on this motherboard. This
header is used for connecting
a USB 3.2 Gen2x2 module
for additional USB 3.2
Gen2x2 ports.
H670 PG Riptide
21