Skoda TRUNK GRILLE Manual De Instrucciones página 11

All manuals and user guides at all-guides.com
Trunk grille
The accessories are intended for professional fitting. ŠKODA AUTO recommends that they are
fitted by a contractual partner.
Component index for the trunk grille set (Fig. 1)
Component
Trunk grille
M8 rivet nut
M8 rivet nut (hex head)
Adapter
Panel (in the roof lining)
Panel (in the side luggage compartment lining)
M8 screw, short
M8 screw, long
Template (for marking the drilling hole
in the roof lining)
Mounting instructions
Note
If the rivet nuts are ever lost, you can order more from the ŠKODA Original Accessories
catalogue using part number 3T9 071 754.
List of special tools
Drilling tool (diameter 26 mm) for drilling holes in the roof lining on the vehicle's D-pillars
– MTX 9-193/B.
Riveting tool for riveting rivet nuts (B) (in the holes in the roof side panel below the roof lining
– MTX 9-193/A), open-end wrench SW 21, Allen key no. 10.
Tool for inserting adapters (D)
- M8 x 50 bolt, M8 nut with washer, open-end wrench SW 13.
Blade hole sawing bit (diameter 32 mm) for drilling holes in the side luggage compartment
lining.
Riveting tongs for M8 rivet nuts, e.g. V.A.G. 1765B order no. ASE 451 499 00 000 – for riveting
rivet nuts (C) in the holes in the wheel cover panel under the luggage compartment lining.
Pins, suction device.
Important mounting notes
Remove the luggage compartment lining from the vehicle and fold down the rear seat
backs.
Insert the trunk grille in accordance with the figures in the instructions (locations for
positioning the attachment points see arrows in fig. 2).
Quantity Item
1 A
2 B
2 C
2 D
2 E
2 F
2 G
2 H
1 J
1
EN
11