Print In Color; Set The Print Quality - Rimage PrismPlus! Guia Del Usuario

Print in Color

1. Install a multicolor ribbon in the printer. Refer to
2. Navigate to Print Propertie
3. Select the Device Settings tab.
4. Select the Installed Ribbon setting.
5. Select Color, Three Panel CMY from the dropdown list.

Note: The Double Print selection is disabled when a color ribbon is selected. Double print is not available during the
color printing process.
6. Select the Media Type.
7. Select the Print Strobe setting and set the value anywhere in the range of 375 to 425.

Notes:
•
These are recommended settings for Rimage brand media.
•
This may require multiple test printings on discs to fine-tune the color hue. Set
Enabled to lower an individual color's print strobe. For example, this setting can be used to lower the Yellow
Print Strobe setting when trying to eliminate a halo effect on a printed disc.
8. If this is a standalone printer, disable
Halftone Setup Properties to make changes that affect color intensity, color balance, or pattern settings.
9. Select
10. Select OK to save the changes and close the Rimage Perfect Image Printer PF Properties window.

Set the Print Quality

1. Navigate to Print Propertie
2. From the General tab, select Printing Preferences. The Rimage Perfect Image Printer PF Printing Preferences window
opens.
3. Select Advanced. The Rimage Perfect Image Printer PF Advanced Options dialog box opens.
4. Select the resolution.
5. Select OK. The Rimage Perfect Image Printer PF Advanced Options dialog box closes.
6. Select OK. The Rimage Perfect Image Printer PF Printing Preferences window closes.
7. Select OK to save the changes and close the Rimage Perfect Image Printer PF Properties window.
110635_J
All manuals and user guides at all-guides.com
Change the Print Ribbon
s. Refer to page 14.
Perfect Print option. This option is only available on select Rimage autoloaders.
s. Refer to page 14.
Operate the Prism Printer
on page 19.
Enable Color Sub-Strobes to
15