Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. Remove metal tab – Using 17mm socket with wrench remove (1) bolt from
metal tab on passenger side frame rail. Remove metal tab and return to owner
with bolt.
5. Remove plugs and caulking – Using flat head screwdriver remove (3) plastic style plug (on driver side), (2) plastic style plug (on passenger side) and (2) rubber plug
from both side frame rails. Return the plugs to owner. Using utility knife, remove 1/2" caulking from both side frame rails close to forward attachment hole for easier
installation. NOTE: Make sure that vehicle weldnuts are free from rust and debris. Use wire brush to clean the weldnuts if needed.
©2020 Horizon Global Americas Inc. - Printed in Mexico
4. Lower muffler – Using an exhaust hanger removal tool, lower muffler by
removing (1) rearmost rubber hanger. A spray of lubricant or soapy water on
rubber hanger makes it slide off metal pins more easily. NOTE: Be sure that
exhaust is properly supported before removing rubber hanger.
Sheet 9 of 30
76336NP
06-18-20
Rev. A
Tabla de contenido
