BE QUIET! DARK POWER PRO Manual Del Usuario página 27

FAN
The four fan connections are indicated with FAN. The fan connections are to be attached at these junctions. The
attached fans are later controlled by the internal automatic controls.
P8 CONNECTOR
The P8 connector is required for mainboards with several processors. These provide the processors with an extra
12V circuit that is required for a stable operation.
EPS ( AS OF 650W )
The additional 6 Pin EPS connector is, for special mainboards, required in the server and workstation area. This
connector is available to you as of the 650W model
MB
PCIE1 AND PCIE2
with electricity. There is, in each case, a 6 pin connector on each end of the cable. These can then convert into 8 pin
connectors by applying the pluggable pins.
27