Tabla de contenido
Battery
10
Charging
• Before first use ensure the battery is fully charged.
• For optimum performance the battery should be fully charged before use.
• If the battery has not been used for 2-3 months ensure it is fully charged
before using.
• Do not charge for more than 24hrs on a single charge.
• Always recharge the battery as soon as possible after using.
• If the battery is fully depleted after use always recharge within 7 days.
Connecting the Battery
1.
Insert the battery into the battery compartment.
2.
Ensure the battery is locked in place.
Disconnecting the Battery
1.
Slide the battery lock away from the battery.
2.
Pull the battery away from the flash head.
Battery Charge Indicator
The current battery charge level can be checked in two ways on the XMT500.
1.
The battery charge level can be checked directly on the battery via three LEDs.
2.
The battery charge level is always displayed on the LCD screen.
LED Battery Indicator
1 red & 3 green LEDs
1 red & 2 green LEDs
1 red & 1 green LED
1 red LED
No LEDs
LCD Battery Indicator
Description
3 bars
Full charge
2 bars
Half charge
1 bar
Low charge
No bars
<10% charge
Blinking
Charge less than sufficient to power unit.
Flash head will turn off.
Tabla de contenido
