Connections With Audio Equipment - Edirol STUDIOCANVAS SD-80 Guía De Iniciación

Connections with audio
equipment
You will not hear any sound from the SD-80 unless you connect headphones to the Headphones
jack, or connect the audio outputs (analog) of the SD-80 to your audio playback equipment as
shown below. You will need the following items.
• SD-80
• Audio cables
• Audio playback equipment such as an amp and speakers, or a stereo system
* Before making connections to other equipment, you must turn down the volume of all equipment to avoid
malfunctions or speaker damage.
* To avoid short circuits or broken connections, grasp the plug when disconnecting a cable.
* Some connection cables contain a resistor. Do not use a cable with a built-in resistor to connect with the
SD-80. Doing so may make the sound extremely weak, or inaudible. For details on your cable, please contact
its manufacturer.
1
Lower the volume of your audio playback equipment.
2
Connect the SD-80's OUTPUT1 jacks to the input jacks of your audio playback equipment. If you
are using headphones, connect them to the Headphone jack located on the front panel of the
SD-80.
fig.8-1e
8
LINE IN
INPUT
OUTPUT
SD-80