Installing The Sd-80 Driver (Oms) - Edirol STUDIOCANVAS SD-80 Guía De Iniciación

Installing & Setting Up the Driver (Macintosh)

Installing the SD-80 driver (OMS)

Use the following procedure to install the SD-80 driver.
The included SD-80 OMS driver is an add-on module for using the SD-80
with OMS. In order for you to use it, OMS must already be installed on the
hard disk from which you started up.
If you would like to learn more about OMS, refer to OMS_2.3_Mac.pdf
(online manual) in the OMS2.3.8E folder within the OMS folder of the
CD-ROM.
* Disconnect the SD-80 from the Macintosh before you perform the installation.
1
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to exit this as well.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive.
3
Double-click the SD-80 OMS Driver-E Installer icon (found in the Driver
E-OMS folder of the CD-ROM) to start up the installer.
4
Verify the Install Location, and click [Install].
fig.3-2_40
5
If a message like the following is
displayed, click [Continue].
The other currently running
applications will exit, and
installation will continue.
6
A dialog box will indicate Installation completed.
Click [Restart] to restart your Macintosh.
7
Use the USB cable to connect the SD-80 to your computer.
8
Set the SD-80's power switch to the ON position.
26
OMS can be found in the
OMS 2.3.8 E folder within
the OMS folder of the
CD-ROM.
You will need the Adobe
Acrobat Reader in order to
view OMS_2.3_Mac.pdf.
The latest version of
Adobe Acrobat Reader can
be downloaded from the
Adobe website. http://
www.adobe.com (This
URL may change without
notice.)
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
Always make sure to have
the volume level turned
down before switching on
power. Even with the
volume all the way down,
you may still hear some
sound when the power is
switched on, but this is
normal, and does not
.
indicate a malfunction