Learn Scenario - LEGRAND PRO 21 Manual De Instrucciones

All manuals and user guides at all-guides.com
Operation
The lighting scene setting switch can simultaneously control a set of products (actors) that have been associated with it
during the learn phase (1) , it is then the leader
Using the ON or OFF buttons, the lighting scene setting switch lets you control the lighting points linked to the other pro-
ducts (actors) that are associated with the ON button, thus :
- switch on - short press on the ON button
- increase light level - long press on the ON button
- switch off - short press on the OFF button
- decrease light level - long press on the OFF button
Note : only ON button learning is necessary, the OFF button is learnt automatically.
Using button 1 or 2, the lighting scene setting switch lets you control the lighting points linked to the other products
(actors) that are associated with button 1 or 2, thus :
- scenario (2) - short press on button 1 or 2
- increase light level - long press on button 1
- decrease light level - long press on button 2
The lighting scene setting switch has an interface for infrared signals, for controlling scenarios and/or other products of
the installation.
Note : To achieve dimming, we recommend that the product groups associated with button 1 and 2 are identical. Buttons 1
and 2 can manage two different light levels, as learnt (e.g. button 1 = 33% - button 2 = 66%)
Learning : action of associating products to be controlled simultaneously from a central point.
(1)
The procedure on page 4 describes how to perform this association.
(2) Scenario : the set of products (actors) that are associated with a control button.
Key
The indicator lamp The indicator lamp
goes off blinks slowly

Learn scenario

Step 1 : Start the learn phase (on the LEADER)
Press LEARN
Step 2 : Add an actor to the scenario (on the ACTOR)
Press LEARN
To add a number of products to the scenario, repeat operations
Step 3 : Record the scenario (on the LEADER)
Press LEARN
(2) of the scenario.
3
The indicator lamp
blinks quickly
Press the command key that is to
control the scenario
Press the command key that is to be
associated with the leader
and for each actor.
The indicator lamps of all the products go off.
The scenario is recorded.
4
The indicator lamp
flashes