Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USB Recorder Description
The USB Recorder's source signal is taken directly from
each individual input channel. When playing audio, the
signal will pass through the TAPE IN/USB PLAY control.
The CELEUS TUBE supports playback of WMA and MP3
files with bit rates of up to 320 kbit/s.
45
44
38
39
41. USB Port
Connect your USB flash drive to this input. Once a drive
is connected, the files will initiate and the main menu will
appear on screen. Users are advised to format their USB
memory sticks with a FAT-32 file system. This connector can
also be used to connect to your PC to take advantage of the
onboard storage.
42. Display
This display will display the track number currently being
played. It also offers play, pause and record indicators as
well as the current play/record time.
43. Play Button
Push this button to start and stop playback and recording
of the currently displayed track. Starting a track after it
is paused will resume the track from the point at which it
was paused (in both record and playback mode). When
in recording mode, push and hold this button to finalize
recordings.
44. Back/Next Buttons
Pushing these buttons will allow users to skip back and
forwards between tracks. When the menu is activated,
these buttons are used to scroll through on screen options.
CELEUS TUBE
All manuals and user guides at all-guides.com
45. Stop/Menu Button
Push this button to stop playback or recording when
applicable. Push and hold the button to access the USB
recorder/player's main menu.
46. Wireless Pairing Switch and Indicator
This switch turns the Bluetooth function of the CELEUS
TUBE on and off. The "WIRELESS READY" LED will
light up when a connection is established between most
Bluetooth-enabled Smartdevice and
36
the CELEUS. The bluetooth signal
is fed through channel 2. Ensure the
channel's "BT" button is engaged on
this channel. The CELEUS TUBE will
appear as Phonic.BT in your device's
41
bluetooth selection menu.
47. Transistor/Tube Switch
42
This switch allows users to adjust the output source of both
the MAIN OUT and the REC OUT output connectors. The
signal of the selected output mode is taken directly from
43
the corresponding level control (TRANS or TUBE level
controls).
37
40
46
47
7
Capítulos
Tabla de contenido
