Auto Recharge And Resume; Using Your Robovac; Turn On / Off; Start Cleaning - EUFY RoboVac X8 Hybrid Manual Del Usuario

English
• If RoboVac is not used for a long time, to preserve the battery's lifespan,
recharge at least once every 6 months.
• When RoboVac is being charged, to enter Reduced Power Standby mode
for power-saving, simultaneously press and hold the three buttons (
& & ) on RoboVac for 10 seconds until the lights turn off. Wi-Fi
is disabled while this mode is active. Press
Standby mode.

Auto Recharge and Resume

RoboVac returns to the Charging Base automatically to recharge when:
• RoboVac has finished cleaning;
• Cleaning is not complete and the battery level becomes low; once recharged to
80% battery capacity, RoboVac will resume and finish the remaining cleaning.
Do not move the Charging Base during cleaning, otherwise RoboVac may
fail to return for recharge. If failed, you have to manually attach it to the
Charging Base. If the Charging Base is moved, start cleaning from the new
location. RoboVac will automatically return when it has finished cleaning.

Using Your RoboVac

Turn On / Off

• RoboVac turns on automatically when attached to the Charging Base and connected
to power.
• When RoboVac is not on the Charging Base, press and hold
turn on the main unit. Wait until the Power Status Light turns solid blue.
• When RoboVac is not on the Charging Base, press and hold
to turn off the main unit.

Start Cleaning

RoboVac cannot start cleaning if the battery level is low. In this case,
recharge RoboVac first before cleaning.
26
to exit Reduced Power
for 3 seconds to
for 3 seconds again
Press to start cleaning in Auto cleaning mode.
1
RoboVac moves around to scan the environment and builds a map
automatically.
2 Press again to pause cleaning.
Press to resume cleaning.
When cleaning is paused, docking RoboVac onto the Charging Base will stop
the cleaning.
If cleaning is paused for 10 minutes, RoboVac automatically stops cleaning and
switches to sleep mode.
Press to stop current cleaning and return to the Charging Base.
3
Before cleaning, tidy cables and cords to avoid power interruption or any
damage caused by pulling the cord during cleaning.

Use Your RoboVac with the EufyHome App

To fully enjoy all the available features, it is recommended to control your RoboVac via
the EufyHome app.
Before you start, make sure that:
• Your smartphone or tablet is running iOS 9.0 (or above) or Android 5.0 (or above).
• The 2.4GHz band wireless signal is enabled on your wireless router.
• The Wi-Fi status light on RoboVac is slowly flashing blue.
• Your smartphone or tablet has enabled Bluetooth to ensure a better connection.
• RoboVac has enough power during setup.
English
27