Ce Marking; Certification Mark; Installation; Safety - Blanco Hot Boiler 4L EU Instrucciones De Uso Y De Montaje

GENERAL INFORMATION
Material damage
The user must protect the system against frost.
Material damage
Discolouration may arise if boiling water is allowed to splash onto the
same spot on composite kitchen sinks on a constant basis.
2.3

CE marking

The CE marking provides proof that the system complies with all basic requirements:
- Low Voltage Directive 2014/35/EU
- EMC Directive on Electromagnetic Compatibility 2014/30/EU
Harmonised standards:
EN 60335-1:2012, EN 60335-2-21:2012 A1:2018-CSV
2.4 Certification mark
See rating plate on the boiler.

INSTALLATION

3.

Safety

Only a trained technician may install the boiler, put it into operation and maintain it.
Only the manufacturer may carry out repairs to the boiler.
3.1

General safety instructions

We can only guarantee that the boiler will function perfectly and safely if you operate
it with an appropriate BLANCO mixer tap and the matching BLANCO safety assembly
module and install these components properly. Use only the original accessories and
original spare parts for the system.
3.2

Regulations, industrial standards and legislation

Important
Observe all national and regional regulations and legislation.
EN
19